Whole-room bedroom — 140 m² show flat

Three bedrooms furnished as complete sets: upholstered beds, bedside tables, desks and storage, running one finish schedule from the master bedroom to the children room.

Client name withheld at the client’s request. Photographs are from the show flat.

At a glance

SegmentResidential show flat
ScopeMaster bedroom, second bedroom, children room
SuppliedUpholstered beds, bedside tables, desks, storage
CustomisationSizes set to the room, one finish schedule
Inspection100% of units before packing

The brief

A 140 m² show flat needed three bedrooms that read as one house rather than three showrooms. Each room had a different function — master suite, guest bedroom, children room — but the buyer walks them in sequence, so the beds, bedside units and desks had to hold the same proportion and the same board tone.

Where the risk was

Three rooms, three logics

Beds are upholstered, casegoods are board-built and desks are a third supply line. If each is specified on its own, the three rooms stop looking like one house.

Rooms are not square

Wardrobe runs meet window reveals and angled walls. A piece sized from a catalogue will either leave a gap or block a door swing.

Finishes have to be seen together

Board tone, fabric tone and hardware are compared side by side on site. A near-match that looked acceptable in a sample book is obvious in the room.

How it was handled

StepWhat was done
1. Room reviewEach plan was checked for wall runs, window reveals, door swings and mattress size before any piece was selected.
2. One finish scheduleBoard, veneer, edge banding and hardware were set once and applied to all three rooms.
3. Three-view drawingEach piece was drawn to the opening rather than sized from a catalogue.
4. SampleThe bed fabric and the board tone were compared side by side before production.
5. InspectionEvery unit checked before packing, including edge banding and drawer alignment.
6. PackingPacked by room, so each bedroom arrived complete rather than in three drops.

On site

Study corner, storage and wardrobe within the bedroom floor.

Study desk and shelving in a bedroom

Study corner — desk and shelving

Built-in storage and cabinet detail

Storage — built-in cabinet

Walk-in wardrobe with glazed doors

Wardrobe — glazed doors

Quality gate

Frame and foam carry a three-year warranty against collapse and deformation under normal use. Every piece is inspected before packing; casegoods use E1 board with formaldehyde-tested wadding, and the reports are listed by number on the certification page.

What it means for your project

A whole-room order is decided at the finish stage. Once the board tone and the fabric are agreed on one sample, the remaining rooms can be repeated without re-deciding — and that is cheaper and faster than matching three purchases after the fact.

Related

Whole-room furniture solution

Product range

Discuss a bedroom set

Questions on this type of order

Can the bed and the wardrobe be ordered together?

Yes. They are set from one finish schedule, and the sample is approved before production.

Can a piece be sized to an alcove or a window reveal?

Yes. Send the plan and the wall dimensions; the piece is drawn to the opening instead of being sized by eye.

Can we order one room first and the rest later?

Yes. A model approved for one room can be repeated in the same dimensions and finish at a later date.

Send the room plan

Room sizes, mattress sizes and the finish direction. We reply within 24 hours on working days.

Request a Quote

This note covers how the order was run. The links below lead to the product families used in this kind of fit-out, and to comparable models in the current range — they are references for specification, not a bill of materials for this project.

Product families

Comparable models: D9103, QY-C172.

Related: Whole-room programme · all project notes · the full product range · send a room plan.