Living and dining share one sightline

In an open-plan room the sofa, the coffee table and the dining table are seen together. If they are bought separately they can still be good pieces and still look wrong together — different seat heights, two wood tones, three levels of detail.

This page follows the questions buyers ask when the living and dining areas are furnished as one scheme — the same ones our team answers every week.

Typical brief

Send the plan with the seating and dining zones marked, plus the scheme or the reference images. We come back with a matched list for both zones.

Start a Project

What an open-plan package includes

Upholstered seating is made in our workshop; dining tables, dining chairs and coffee tables come from long-term partner workshops, matched to the same finish and fabric direction.

Living room seating with upholstered sofa and accent wall

Seating zone

Curved or modular sofa sized to the wall run, with coffee tables and accent chairs sharing the same palette.

Dining area with table and chairs in a residential project

Dining zone

Table and chairs scaled so the two zones do not crowd each other, with the chair back height set against the sofa.

Lounge corner with accent seating against a red wall

Occasional pieces

Accent chairs, side tables and consoles that connect the two zones rather than dividing them.

Questions buyers ask first

Grouped from the enquiries our sales team handles most often on open-plan living and dining projects.

“Can the sofa be adjusted to the wall run?”

Straight runs can be adjusted by the metre; chaise sections are usually fixed. Send the wall length and the door or lift width, and we confirm the largest piece that can be delivered and still leave the walkway clear.

“Will the dining chairs match the sofa?”

They can. The two are set from one finish and fabric direction, and the chair back height is checked against the sofa back so the dining zone does not sit visually higher than the seating zone.

“Can two different sofas sit in the same room?”

Yes, and it is common. The two models are checked against each other — seat height, depth and spacing — so they read as one scheme rather than two purchases.

“Can you match our colour palette?”

Yes. Chenille, technical fabric, linen blends, teddy, velvet and brushed fabrics are in the sample library, and colours can be matched to a card or a physical reference. We confirm the match before cutting.

“How long will it take?”

About 15 days for standard models, 20 days for flexible customisation such as size, fabric or colour, and 30 days for a new frame built from a drawing — counted from approved drawing and deposit.

“Can the sofa and the dining set ship together?”

Yes. Seating, tables and chairs are consolidated into one shipment, and several models can share a container at a minimum of five pieces per model.

“What is the sofa built on?”

Imported pine or larch solid-wood frame, high-resilience high-density foam and the specified fabric. Every unit is inspected before packing, and the frame and foam are covered for three years against collapse and deformation.

“Can you rush an order?”

It depends on fabric stock and the workshop schedule. If the fabric is held locally the order can often be pulled forward by roughly ten days; if it has to be re-ordered, the date cannot be promised. We confirm the same day rather than guessing.

“What if something arrives damaged?”

Every unit is inspected before packing. Frame and foam carry a three-year warranty against collapse and deformation; quality issues are repaired or replaced, and transit damage is handled together with the carrier.

How the order is run

StageWhat happensTiming
Plan reviewWall lengths, walkway width and door or lift access checked against both zonesDay 0
Three-view drawingDimensions and structure approved before material is releasedBefore cutting
SampleWhere the scheme depends on a new silhouette, a sample is built firstBefore production
ProductionSeating in-house; tables and dining chairs consolidated from partner workshops15 / 20 / 30 days by scope
InspectionEvery unit checked before packingBefore packing
PackingPacked by zone, corner-protected for site handlingBefore delivery

On-time delivery rate: 98%, with progress reported every three days through a dedicated group.

Table detail with tray and accent chair in an open-plan living and dining room

A 119 m² flat, living and dining in one room

Sofa, coffee tables, dining table and chairs set as one scheme, with the seating and dining zones kept on the same palette and proportion.

The case shows how the two zones were sized against the plan and how the pieces were packed for one delivery.

Read the case

Quality and compliance

Open-plan orders are checked to the same standard as hotel work: every unit inspected, and frame and foam covered for three years.

100% inspection

Every piece checked before packing — seams, pile direction, hardware and stability.

3-year cover

Frame and foam warranted against collapse and deformation under normal use.

E1 board

Casegoods use E1 board, with formaldehyde-tested wadding for fillings; reports are listed by number on the certification page.

Send the plan and the scheme

Plan with both zones marked, plus the reference the design team is using. We reply within 24 hours on working days.

Request a Quote

Case notes in this programme

See all delivery notes on the projects page, or browse the product range.