About the QY-C21510
QY-C21510 is a dining chair from the FEILIGE made-to-order range. The listed size is 57 x 59 x 78 cm. It is built with an 18 mm curved wood shaped board.
Why specify this model
- Listed dimensions: 57 x 59 x 78 cm
- Construction: an 18 mm curved wood shaped board
- MOQ: 5 pieces per model, mixed styles allowed
- Lead time: about 20 days
Where it fits
At 0.57 m wide it suits dining tables, hotel guest rooms and waiting areas where a compact footprint is needed.
Before you order
Every unit is made to order in Foshan, with no stock inventory; MOQ is 5 pieces per model and mixed styles are allowed. Lead time is about 20 days. Size, configuration and upholstery can be customised against a drawing.
Available Configurations & Dimensions
| Configuration | Dimensions (W×D×H, cm) |
|---|---|
| Standard | 57×59×78 cm |
Construction, customisation and project use
QY-C21510 is a dining chair with high-density foam under fabric upholstery, built on a solid wood internal frame. Where the span is long, the frame is braced across the middle rather than stiffened at the ends only. Seat and back are filled separately, so the back does not take the compression of the seat. Dimensions and finish can be adjusted to the layout; material selection is confirmed with samples before production.
It is specified where a dining room runs long service and chairs are pulled in and out constantly. It measures 57×59×78 cm as listed, with the size open to adjustment on a drawing. Around a round table the back curve lets the chairs sit closer without the shoulders colliding.
Production is booked at about 20 days from drawing sign-off, with MOQ 5 pieces per model. Seat height, width and depth are measured on the finished unit before it is wrapped. Send the room schedule and we will return the configuration that fits it.
Request a Quote for QY-C21510
Tell us the model number, quantity and destination port. Made to order in Foshan; MOQ 5 pieces per model, mixed styles allowed; lead time about 20 days.

















